Ohlins TTX 22 Tech Help

OHLINS TTX22M TECH HELP

LAST UPDATE: OCTOBER 2020

This page list technical informations about Öhlins TTX22M rear shocks for mountain bikes. Prices listed here are only valid in Switzerland and subject to change without warning. Looking for a part that is not available online? reach us at contact@pmbswiss.ch

The basics:

  • First Öhlins TTX22M for Mountain Bike was released in 2015 and the line up got updates with new sizes and improvements ever since.
  • TTX22M are available in standard sizes as well as custom units for specific bikes.
  • TTX22M have different spring series. Springs must be chosen based on the rider (weight and level of practice) and the bike (shock length, travel, kinematics).
  • TTX22M can be mounted in different ways using mounting hardware from Öhlins or other brands; adapters are sometimes required
  • Specialized: Öhlins makes specific TTX22M Specialized frames with specific requirements; new Kenevo, Demo and Enduro from 2020+ do not require specific TTX22M units, but sometimes travel need to be adjusted to fit the frame

Contents


Öhlins TTX22M Service Intervals

Öhlins recommend service "every 50 hours of riding or once a year". Suspensions are made of dozens of parts and several fluids that have a limited lifespan and require maintenance. Skipping service will only lower performance and increase the risk of failure. To better track how much you use bike and therefore when you should get your service for your suspensions, you can use our Suspension Maintenance Schedule Template.


Understanding Öhlins TTX22M part numbers

TTX22M dampers have markings on the cylinder head and the box. Here is how to understand these:

Acronym Meaning
MTB MTB Product Line
MTBM MTB Metric Shock
AM After Market
TM Trunnion Mount
15, 16, 18, 19..

Release year

Example: 19 = 2019

Not to be mistaken with the year it was made

SBC Specialized Bike Components: made for Specialized
SBCS Specialized Unit with "S" (light) settings
SBCM Specialized Unit with "M" (medium) settings
No marking Unit was custom built or cylinder head was replaced

Öhlins TTX22M Diagram

Öhlins TTX22M / TTX22 Diagram

Current Öhlins TTX22M models

See Legacy Öhlins TTX22M for other sizes and models

Part Number Mount / Cylinder Head Length x Travel Made for Spring Serie Possible Travel Notes Link
MTBM 1942 Trunnion / Piggyback 225x75 Frames with Trunnion mount 18073 75, 72.5, 70, 67.5 Stop cap: 18025-01 link
MTBM 1940 Trunnion / Piggyback 225x70 Metric frames with Trunnion mount 18073 75, 72.5, 70, 67.5 Stop cap: 18025-01 link
MTBM 1979 Trunnion / Piggyback 205x65 Metric frames with Trunnion mount 18077 65, 62.5, 60, 57.5 Stop cap: 18025-01 link
MTBM 1979S Trunnion / Piggyback custom Scott Ransom 2020+ 205x65 Scott Ransom 2020; also compatible with other frames with enough clearance 18077 65, 62.5, 60, 57.5 Not mass produced: build-to-order only link
MTBM 1977 Trunnion / Piggyback 205x60 Metric frames with Trunnion mount 18077 65, 62.5, 60, 57.5   link
MTBM 1975 Trunnion / Piggyback 185x55 Metric frames with Trunnion mount 18075 55, 52.5, 50, 47.5 Stop cap: 18025-01 link
MTBM 1973 Trunnion / Piggyback 185x50 Metric frames with Trunnion mount 18075 55, 52.5, 50, 47.5   link
MTBM 1972 Trunnion / Piggyback 165x45 Metric frames with Trunnion mount

18076

18075

40, 42.5, 45 Stop cap: 18025-03 link
MTBM 1899 Standard / Side-by-side 250x75 Metric frames with standard mount 18073 75, 72.5, 70, 67.5 Delivered with additional -2.5mm spacer to change stroke to 72.5 (250x72.5) link
MTBM 1898 Standard / Side-by-side 250x70 Metric frames with standard mount 18073 75, 72.5, 70, 67.5   link
MTBM 1896 Standard / Side-by-side 230x65 Metric frames with standard mount 18077 65, 62.5, 60, 57.5   link
MTBM 1895 Standard / Side-by-side 230x60 Metric frames with standard mount 18077 65, 62.5, 60, 57.5   link
MTBM 1893 Standard / Side-by-side 210x55 Metric frames with standard mount

18077 (-01 to -15 max)

18075

55, 52.5, 50, 47.5   link
MTBM 1892 Standard / Side-by-side 210x50 Metric frames with standard mount

18077

(-01 to -15 max)

18075

55, 52.5, 50, 47.5   link
MTB 1493 (DH) Standard / Side-by-side 9,5x3" (240x76) DH frames with standard mount 18073 N/A

Delivered with DH-focused internal settings

Will be phased out end 2020

link
MTB 1492 (DH) Standard / Side-by-side 8,75x2,75" (222x70) DH frames with standard mount 18077 N/A

Delivered with DH-focused internal settings

Will be phased out end 2020

link
MTB 1491 (DH) Standard / Side-by-side 8.5x2.5" (216x63) DH frames with standard mount 18074 N/A

Delivered with DH-focused internal settings

Will be phased out end 2020

link
MTB 1496 Standard / Side-by-side 7.87x2.25" (200x57) Frames with standard mount 18075 N/A Will be phased out end 2020 link
MTB 1497 Standard / Side-by-side 7.87x2.0" (200x51) Frames with standard mount

18076

18075

N/A Will be phased out end 2020 link
MTB 1498 Standard / Side-by-side 7.5x2.0" (190x51) Frames with standard mount

18076

18075

N/A

Can be used on metric frames made for 190mm shock - additional stop cap might be needed

Will be phased out end 2020

link
SBC 1815 Standard / Side-by-side

241.5x76.2 (9.5x3")

Specialized Demo 2015-2017

18073 

18060 

N/A

SBCS = Small (light tune)

AKA SBCS15110 (Demo Carbon Type "Small") (see notes)

link
SBC 1835 Standard / Side-by-side + SBC square mount

216x57 (8.5x2.25") - stock travel with spacer, see notes

216.3x61 (8.5x2.4") - without spacer - see notes

Specialized Enduro 2013-2019

Specialized Kenevo 2017-2019

18077

18074

57 or 61 mm

Delivered with a spacer behind the bumper - removing the spacer make it compatible with Kenevo; that spacer is also for use on 26" Enduro

Delivered with 8/19 mounting hardware for Enduro. Kenevo users will need 8/22 mounting hardware.

Replace both SBC 1735 and SBC 1885

Not for Enduro EVO

Not for Enduro 2020: use a 205x60 Trunnion TTX22 instead

Not for Kenevo 2020: use a 230mm TTX22 with travel modified to 62.5mm by a service center

link
SBC 1979 Standard / Side-by-side 210x52.5

Specialized Levo 2019-2021

Specialized Levo SL 2020-2021

Stumpjumper2019-2020 27.5"

Stumpjumper 2021 EVO S2-S6 (with stop cap replaced by Öhlins service center for 55 mm travel)

18075 52.5, 50

Shared with Stumpjumper 2019 27.5

Delivered with 6/20 mounting hardware

Travel can be changed to 50 to make it the same as SBC 1974

link
SBC 1974 Standard / Side-by-side 210x50

Stumpjumper 29"

2019-2020

Stumpjumper 2021 EVO S1

18075 52.5, 50 Travel can be changed to 52.5 to make it the same as SBC 1979 link
SBC 1775 Standard / Side-by-side + SBC square mount 197x47.5 (7.75x1.87")

Specialized Levo 2016-2018

Stumpjumper 2016-2018

18075

18076

N/A - require extensive modification to adapt anywhere else

47.5mm travel achieve by 2.5mm spacer between piston holder and sealhead

Not compatible with limited edition Stumpjumpers from 2017: use TTX22 7.5x2 (MTBM 1698) and Bikeyoke SJ02 instead

link

Legacy Öhlins TTX22M models

These models are not available from the factory anymore.

Update, September 2020:

  • MTB16** shocks are still available as build-to-order, contact us if you are interested
  • MTB1495 (10.5x3.5/266.5x86.7) and SBC1885 are still available from our stock
Part Number Mount / Cylinder Head Length x Travel Made for Spring Serie Possible Travel Notes Link
MTBM 1894 Standard / Side-by-side 230x57.5 Metric frames with standard mount 18077 N/A

No Longer Available from factory

Replaced by MTBM 1895 (230x60) with +2.5mm stop cap or MTBM 1896 (230x65) with -2.5mm stop cap

-
MTB 1694 Standard / Piggyback

10.5x3.5" (266.5x86.7)

DH frames with standard mount 18065 N/A

No Longer Available from factory

Can be build to order, contact us

-
MTB 1494 Standard / Side-by-side 10.5x3.5" (266.5x86.7) DH frames with standard mount 18073 N/A

Still in stock at PMB, contact us

No Longer Available otherwise

link
MTB 1693 Standard / Piggyback 9.5x3" (240x76) Frames with standard mount 18073 N/A

Still in stock at PMB, contact us

No Longer Available from factory

link
MTB 1692 Standard / Piggyback 8.75x2.75" (222x70) Frames with standard mount 18077 N/A

No Longer Available from factory

Can be build to order, contact us

-
MTB 1691 Standard / Piggyback 8.5x2.5" (216x63) Frames with standard mount 18074 N/A

No Longer Available from factory

Can be build to order, contact us

-
MTB 1695 Standard / Piggyback 8.5x2.25" (216x57) Frames with standard mount 18074 N/A

No Longer Available from factory

Can be build to order, contact us

-
MTB 1495 Standard / Piggyback 8.5x2.25" (216x57) Frames with standard mount 18074 N/A

No Longer Available from factory

Can be build to order, contact us

-
MTB 1696 Standard / Piggyback

7.87x2.25" (200x57)

Frames with standard mount 18075 N/A

No Longer Available from factory

Can be build to order, contact us

-
MTB 1697 Standard / Piggyback

7.87x2" (200x51)

Frames with standard mount

18075

18076

N/A

No Longer Available from factory

Can be build to order, contact us

-
MTB 1698 Standard / Piggyback

7.5x2" (190x51)

Frames with standard mount

18075

18076

N/A

No Longer Available from factory

Can be build to order, contact us

-
SBC 1735 Standard / Side-by-side + SBC square mount 216x57 (8.5x2.5") Specialized Enduro 2013-2017

18077

18074

N/A

No Longer Available from factory

Replaced by SBC 1835

-
SBC 1885 Standard / Side-by-side + SBC square mount 216.3x61 (8.5x2.4") Kenevo 2017-2019

18077

18074

N/A

AKA "1880"

Still in stock at PMB, contact us

No Longer Available otherwise

Replaced by SBC 1835

link
SBC 1575 Standard / Side-by-side + SBC square mount 216x57 (8.5x2.25") Stumpjumper 2016 18075 N/A

No Longer Available from factory

Replaced by SBC 1775

-
SBC 1521 Standard / Side-by-side + SBC square mount

222,3x63,5 (8.75x2.5")

Enduro EVO 2014

-

N/A

Specific for Enduro EVO

Replaced 1520

Include special cylinder head with offset to better fit the EVO frame - not compatible with other frames

No Longer Available

-
SBC 1425 Standard / Side-by-side + SBC square mount

215,9x63,5 (8.5x2.5")

Enduro EVO 2013

-

N/A

No Longer Available

-
SBC 1435 Standard / Side-by-side + SBC square mount

216,2x57,5 (8.5x2.25")

Enduro 29" 2013

-

N/A

No Longer Available

Use SBC1835 instead

-
SBC 1425 Standard / Side-by-side

241,3x76,2

Demo 2013 (2011-2014)

-

N/A

No Longer Available

Also known as "MTB 1415"

-
MTB 1415 Standard / Side-by-side

241,3x76,2

Demo 2013 (2011-2014)

-

N/A

Same as SBC 1425

-

Öhlins TTX22M for Specialized Levo / Kenevo / Enduro / Stumpjumper / Status / Demo

Important: the following list only take into account shocks that are currently available for Specialized bikes including units made for specific frame and standard units that work on newer frames. For previously available units, refer to the Legacy Öhlins TTX22M models.

Öhlins TTX22M for Specialized Levo

Bike Model / Year Length x Travel Öhlins TTX22M Model Spring Series Notes Availability Link
Specialized Levo SL 2020-2021 210x52.5 SBC 1979 18075

Delivered with 6/20 mounting hardware

Available link
Specialized Levo 2019-2021 210x52.5 SBC 1979 18075

Delivered with 6/20 mounting hardware

Available link
Specialized Levo 2016-2018 197x47.5 SBC 1775

18075

18076

  Available link

Öhlins TTX22M for Specialized Kenevo

Bike Model / Year Length x Travel Öhlins TTX22M Model Spring Series Notes Availability Link
Specialized Kenevo 2020-2021 230x62.5 MTBM 1896 (230x65) with a -2.5mm stop cap 18077

Not available from the factory

Stop cap must be installed by a Öhlins service center

MTBM 1895 (230x60) can also be used with a +2.5mm stop cap

Available link
Specialized Kenevo 2017-2019 216.3x61 (8.5x2.4") SBC 1835

18077

18074

Plastic spacer behind the bumper need to be removed to adjust travel for Kenevo 2017-2019. SBC 1835 is dual use Enduro / Kenevo and the spacer is what make it possible to adapt travel for both bikes.

Replace SBC 1885

Available link

Öhlins TTX22M for Specialized Enduro

Bike Model / Year Length x Travel Öhlins TTX22M Model Spring Series Notes Availability Link
Specialized Enduro 2020 205x60 (Trunnion) MBTM 1977  18077

No change needed: standard MBTM 1977 will work

No mounted hardware needed: direct mount on Specialized mounting hardware

Available link
Specialized Enduro 2013-2019 except EVO and SX models 216x57 (SBC square mount) SBC 1835

18077

18074

 

Available link

Reference Enduro Shock Length x Travel reference table:

Bike Model / Year Length x Travel
Specialized Enduro 2020 205x60 (Trunnion)
Specialized Enduro 2017-2019 (all) 216x57 (SBC square mount)
Specialized Enduro 2016 (non EVO) 215.9x57.2 (SBC square mount)
Specialized Enduro EVO 650b 2016 8.75x2.5" (222.5x63.5)
Specialized Enduro 8.75x2.5" (222.5x63.5) 215.9x57.2 (216x57)
Specialized Enduro EVO 2015 8.75x2.5" (222.5x63.5)
Specialized Enduro SX 2015 203x44.5
Specialized Enduro 2014 (including Enduro 29 S-Works 2014) 215.9x57.2
Specialized Enduro EVO 2014 8.75x2.5" (222.5x63.5)

Öhlins TTX22M for Specialized Stumpjumper

Bike Model / Year Length x Travel Öhlins TTX22M Model Spring Series Notes Availability Link
Specialized Stumpjumper

EVO 2021

(S2-S6)

210x55

SBC 1974 or SBC 1979 with 0mm stop cap

18075

18076

Mounting hardware to be defined

Available link
Specialized Stumpjumper

29" 2019-2020

EVO 2021 (S1)

210x50

SBC 1974

18075

18076

Can be converted to 210x52.5 to work on Stumpjumper 2019-2020 27.5", Levo 2019-2020, Levo SL 2020

Available link
Specialized Stumpjumper 2019-2020 27.5" 210x52.5 SBC 1979

18075

18076

 

Available link

Öhlins TTX22M for Specialized Status

Bike Model / Year Length x Travel Öhlins TTX22M Model Spring Series Notes Availability Link
Specialized Status 2020-2021 230x60 MTBM 1895 (universal unit) 18077

No change needed: standard MTBM 1895 will work

Available link
Specialized Status I & II 2011-2016

8.5x2.5 or 8.75x2.75 depending on model

MTB 1491 (universal unit)

18074

Will be discontinued end 2020

Available link

Öhlins TTX22M for Specialized Demo

Bike Model / Year Length x Travel Öhlins TTX22M Model Spring Series Notes Availability Link
Specialized Demo 2019-2021 225x75 MTBM 1942 18073

No change needed: standard MTBM 1942 will work

Available link
Specialized Demo 2015-2017 241.5x76.2mm (9.5x3") SBCS 1815

18073

18060

SBCS = Small (light tune)

AKA SBCS15110 (Demo Carbon Type "Small") (see notes)

Available link

Öhlins TTX22M spring series

To identify the right spring, use the Ohlins Performance Suspension Guide

Current Öhlins TTX22M spring series

Spring Serie

Stroke Max

Range in practice (mm) Spring Min

Sring Max

Notes! Link
18073 75 / 3.00" 66-76 -01 (44 N/mm / 251 lb/in) -15 (100 N/mm / 571 lb/in) Lightweight Spring Link
18077 57-67 / 2.25-2.65" 57-68 -01 (44 N/mm / 251 lb/in) -19 (124 N/mm / 708 lb/in)

Lightweight Spring

Important:

  • 18077-14 to -15 will be a tight fit on 210 mm shocks
  • 18077-16 to -19 are not compatible with 210mm shocks
Link
18074 57 / 2.25" 57-63 -06 (64N/mm / 365 lbs/inch) -19 (124N/mm / 708 lbs/inch)

Lightweight Spring

Still available but will be phased out end 2020

Link
18075 57 / 2.25" 41-58 -06 (64N/mm / 365 lbs/inch) -17 (112N/mm / 640 lbs/inch) Lightweight Spring Link
18065 89 / 3.50" 80-90 18065-01 (44 N/mm / 251 lbs/inch) 18065-09 (76 N/mm / 434 lbs/inch)

Limited availability

Only for TTX22 10.5x3.5"

Link

Legacy Öhlins TTX22M spring series

Spring Serie

Stroke Max

Range in practice (mm) Spring Min

Sring Max

Notes! Link
18076 57 / 2.25" 41-52 -06 (64 N/mm / 365 lb/in) -17 (112 N/mm / 640 lb/in)

Discontinued

Small quantities still available

Link
18070 63 / 2.5" - -02 (48 N/mm / 274 lb/in) -15 (100 N/mm (571 lb/in)

Discontinued

Use 1807718075 or 18074 instead

New old stock still available

Link
18060 75 / 3" - -01 (44 N/mm / 251 lb/in) -11 (84 N/mm / 480 lb/in)

Discontinued

Use 18073 instead

New old stock still available

Link
18055 70 / 2.75" -    

No Longer Available

Use 18073 instead

-

Spring Matrix

Spring Spring Rate Spring series
N/MM LBS/IN 18076 18075 18074 18077 18073 18065
-01 44 251       18077-01 18073-01 18065-01
-02 48 274       18077-02 18073-02 18065-02
-03 52 297       18077-03 18073-03 18065-03
-04 56 320       18077-04 18073-04 18065-04
-05 60 343       18077-05 18073-05 18065-05
-06 64 365 18076-06 18075-06 18074-06 18077-06 18073-06 18065-06
-07 68 388 18076-07 18075-07 18074-07 18077-07 18073-07 18065-07
-08 72 411 18076-08 18075-08 18074-08 18077-08 18073-08 18065-08
-09 76 434 18076-09 18075-09 18074-09 18077-09 18073-09  
-10 80 457 18076-10 18075-10 18074-10 18077-10 18073-10  
-11 84 480 18076-11 18075-11 18074-11 18077-11 18073-11  
-12 88 502 18076-12 18075-12 18074-12 18077-12 18073-12  
-13 92 525 18076-13 18075-13 18074-13 18077-13 18073-13  
-14 96 548 18076-14 18075-14 18074-14 18077-14 18073-14  
-15 100 571 18076-15 18075-15 18074-15 18077-15 18073-15  
-16 106 605 18076-16 18075-16 18074-16 18077-16    
-17 112 640 18076-17 18075-17 18074-17 18077-17    
-18 118 675     18074-18 18077-18    
-19 124 708     18074-19 18077-19    

Springs from other brands

Cane Creek and Fox SLS (orange) springs can generally be used with Öhlins TTX22. As we do not track all the part numbers and specifications from other manufacturers, we recommend checking closely compatibility before use. Using Öhlins springs will ensure performance and compatibility.


Mounting a TTX22M

TTX22M Cylinder Heads and End Eyes

Before mounting a TTX22M it is necessary to understand what mounts the unit has at both ends. All TTX22M have a cylinder head on one side and an end eye, sometimes called "eyelet" at the other side. In some cases mounting can be direct, but in most cases you will need mounting hardware (axle and spacer kits) and sometimes reducers.

Important

  • These parts can not be sold to the general public without installation service by a Öhlins service center
  • This table does not include custom cylinder heads that have been produced for specific frames made by brands like Intense.
Part Number Type Picture Made for Mounting HW to use Notes! Price (CHF)
18008-03 "Side by side" Cylinder Head 18008-03

All TTX22 except universal non-metric and metric trunnion units:

- TTX22 for Specialized

- Metric TTX22

16mm mounting HW

OR

Ball joint + Ball joint mounting HW

OR

use a reducer in order to use 15mm mounting HW from Ohlins / Fox / Rockshox

Not all side by side cylinder heads are the same! Some have been produced with offset to better fit some frames.

219 CHF

18069-01 Cylinder Head with Piggyback 18069-01 TTX22 serie 16 (universal non-metric) 16mm mounting HW

OR

Ball joint + Ball joint mounting HW

OR

use a reducer in order to use 15mm mounting HW from Ohlins / Fox / Rockshox

Taller than side by side

Discontinued

219 CHF

18145-01 Trunnion 18145-01 Metric Trunnion TTX22 units None Taller than Trunnion side by side

219 CHF

G0103-01 Trunnion Side by Side TTX22_CH_TP Trunnion bike frames with restricted fitment for rear shocks, like Scott Ransom. Also relevant for Norco Aurum and other frames. None Available on special request - custom race part with significant lead time for delivery 449 CHF
18145-02 End eye 15 mm kit, press fit 18145-02 Metric TTX22M

Öhlins TTX22 15mm Mounting Hardware

OR

use direct with 15mm screw

Compatible with Gen2 Metric shocks.

Can be mounted on older shocks but will reduce the shock stroke by 2.5 mm.

49 CHF
18021-04 End eye 16 mm (original) 18021-04 Non-metric TTX22M

16mm mounting HW

OR

Ball joint + Ball joint mounting HW

OR

use direct with 16mm screw

OR

use a reducer in order to use 15mm mounting HW from Ohlins / Fox / Rockshox

  49 CHF
18021-05 SBC Square Mount (Specialized) 18021-05 Some TTX22M for Specialized None Most shocks using this eyelet can be replaced by standard shock with a frame-specific Bikeyoke 49 CHF

TTX22M Mounting Guides

Important: Please not that to ensure the shock fits, the shock has to be mounted on the bike and tested.

Guide for 16mm Eyelets

This guide is not for mounting a TTX22 15mm "press fit" eyelet, as found on MTBM 1898, MTBM 1899, TTX22 for Trunnion, SBC 1979, SBC 1974.

Guide for 16mm Eyelets

16mm Mounting Configurations
Configuration Picture Parts Note!
DU Bushing + Öhlins 14mm MHW

16mm mount with 18123-01

18123-01 DU metal bushing

14mm Öhlins MHW (5 pieces)

Best fit but the selection of 14mm MHW is limited to 8 kits
12.7mm adapter + IGUS Bushing + 12.7mm Öhlins or Fox MHW

16mm mount with 18486-01

18486-01 metal reducer

IGUS bushing for Öhlins (18482-01) or Fox (included with Fox MHW kits)

12.7mm MHW from Öhlins or 12.7mm MHW from Fox

  • Second best option
  • The reducer allow the use of IGUS bushing, which are important to achieve fit with 12.7mm MHW
  • More MHW kits to choose from
Öhlins Ball Joint + Spacers

16mm mount with 18124-01 Ball Joint

Öhlins Ball Joint 18124-01

Öhlins spacer kit for ball joint (3 sizes)

More sensitivity but limited choice of spacers

Mandatory on some frames where the shock is not working straight

12.7mm reducer + Öhlins or Fox MHW + additional spacers

16mm to 12.7mm Adapter

12.7mm reducer

12.7mm MHW from Öhlins or 12.7mm MHW from Fox

  • The axle will fit but additional or larger spacers will be needed on the side to fill the gap
  • If no more than 1mm is missing on each side, O-rings can be used to fill the gap

MHW = mounting hardware; N/A = non applicable; 14mm MHW = MHW with 14mm OD; 12.7mm MHW = MHW with 12.7mm OD and 5 pieces

Guide for 15mm Eyelets

This guide is for mounting a TTX 22 M 15mm "press fit" eyelet, as found on MTBM 1898, MTBM 1899, TTX 22 M units for Trunnion, SBC 1979, SBC 1974. It is also for 16mm cylinders with an eyelet reduced to 15mm. This guide is not for mounting of any other type of TTX 22 M eyelet or cylinder head.

Guide for 15mm Eyelets

15mm Mounting configurations
Configuration Picture Parts Note!
12.7mm MHW kit from Öhlins 15mm mount with 18482-01

Öhlins IGUS bushing(18482-01) AND Öhlins 12.7mm MHW

 

~21 sizes to choose from
12.7mm MHW kit from Fox 15mm mount with 18482-01

Fox 12.7mm MHW kit

~29 sizes to choose from, Aluminium or Steel

TTX22M Mounting Hardware

Bushing Kits

Part Number Description Picture Notes! Included Link
18123-01 DU Bushing Kit 18123-01 To use with 14mm Mounting Hardware 1x metal bushing Buy
18482-01 Igus Bushing Kit 18482-01 To use with 12.7mm Mounting Hardware 2x plastic bushing, 2x seals Buy

Ball Joint

Note: only compatible with a limited number of legacy hardware sizes ("ball joint spacer kits")

Part Number Description Picture Notes! Link
18124-01 Ball Joint 18124-01 To use with 18116-01, 18117-01, 18118-01 Buy

Mounting Hardware Kits

  • The following tables are about Öhlins mounting hardware and compatible alternatives available for each size.
  • 12.7mm mounting hardware require an additional IGUS bushing kit, sold separately
  • 14mm mounting hardware require an additional DU bushing kit, sold separately
  • Cross-compatibility: Öhlins 12.7mm mounting hardware will work on other shocks with 15mm eyelets; 12.7mm mounting hardware from other brands (like Fox) will work on Öhlins 16mm eyelets with 18486-01 reducer and 15mm eyelets without any reducer.
  • 7P = 7 pieces, 5P = 5 pieces, 4P = 4 pieces, 3P = 3 pieces, 2P = 2 pieces; pieces = axle, spacers, seals, bushings; total is total per kit, not the total of parts required; Fox mounting hardware kits are sometimes referred as "5P when in fact there is a total of 7 pieces included in the kit.

6MM Mounting Hardware

Mounting Hardware for 6MM Bolts (M6)
Bolt / Mounting Width (mm) Öhlins 12.7mm 5P (1) Öhlins 14mm 5P (2) Fox AL 7P (4) Fox SS 7P (4) Notes (6)
6 / 19.05     803-03-140    
6 / 20 18130-12 18128-01 214-08-026   Levo/Levo SL 19+ and Stumpjumper 2019+; 803-03-244 / 214-08-026 (4P AL) also available from Fox
6 / 22 18130-10       Used by Pivot
6 / 22/22.2 (5)   18110-01      
6 / 26   See notes     Delivered with SBC 1775 (Levo 2017-2018 + Stumpjumper 27.5 2016))
6 / 35.05     803-03-157   Used by Moustache

8MM Mounting Hardware

Mounting Hardware for 8MM Bolts (M8)
Bolt / Mounting Width (mm) Ohlins 12.7mm 5P (1) Ohlins 14mm 5P (2) Ohlins Ball Joint 2P (3) Fox AL 7P (4) Fox SS 7P (4) Notes (6)
8 / 15 18130-23       803-03-243  
8 / 15.75     18116-01 (3)   803-03-199 803-03-136 (3P) also available from Fox
8 / 16         803-03-246 Used by YT, Orbea
8 / 19 18130-11 18126-01       Enduro 2017 (18126-01 = 19/19.05)
8 / 19.05 18130-11 18126-01        
8 / 20 18130-13         Used by YT, Santa Cruz, Propain
8 / 21.8 18130-01 18111-01 18117-01 (3)     Used by Transition, GT and on many older frames
8 / 21.84     18101-02   803-03-200 18101-02 = Enduro 26/29/EVO
8 / 22 18130-02         Kenevo 2017-2019; also used by Yeti, Scott, Pole, Pivot, Orbea, Intense
8 / 22.2 18130-03     803-03-166   8 / 22/22.2 can be used instead
8 / 22/22.2 (5)   18112-01 18118-01 (3)     Demo 2016 (Ball Joint)
8 / 22.86         803-03-202  
8 / 23           Used by Commencal
8 / 25 18130-14         Used by Yeti, Transition, Rocky Mountain
8 / 26 18130-04 18127-01       Stumpjumper 650 2016 & FSR 29 2016
8 / 30 18130-15     803-03-177 ("29.97")   Used by Norco, Santa Cruz, Propain
8 / 34 18130-05     803-03-183 ("33.99")   Used by Intense
8 / 35 18130-16          
8 / 35.05       803-03-184 803-03-208  
8 / 36         803-03-230 Used by Yeti
8 / 40 18130-17       803-03-235 Used by YT, Rocky Mountain, Giant
8 / 44.85 18130-06     803-03-194 ("44.86")    
8 / 45           Used by Yeti
8 / 59.94         803-03-222  
8 / 60   18113-01       Used by Scott

10MM Mounting Hardware

Mounting Hardware for 10MM Bolts (M10)
Bolt / Mounting Width (mm) Ohlins 12.7mm 5P (1) Ohlins 14mm 5P (2) Fox AL 7P (4) Fox SS 7P (4) Notes (6)
10 / 15 18130-24        
10 / 20 18130-18     803-03-232  
10 / 22/22.2 (5)   18114-01   803-03-223 ("22") Used by Mondraker
10 / 25 18130-19     803-03-234 Used by Mondraker
10 / 30 18130-20     803-03-233  
10 / 35 18130-21        
10 / 40 18130-22 18115-01     Used by Trek

(1) Always require IGUS bushings (18482-01); 16mm cylinder heads eyelets and end eyes: also need 18486-01 reducer (delivered with all shocks as of 2021)                        
(2) Always require DU bushing (18123-01); only compatible with 16mm cylinder heads eyelets and end eyes                        
(3) Require Ball Joint 18124-01. Warning: most frames that requires ball joints can not switch to non-ball joint mounting hardware                        
(4) "5P" kits for 12.7mm axles, delivered 2 additional IGUS bushings equivalent to 18482-01; 16mm cylinder heads eyelets and end eyes need 18486-01 reducer to be compatible (delivered on all shocks as of 2021); AL = aluminium, SS = Stainless Steel                        
(5) "22 / 22.2" mounting hardware is both compatible with 22 and 22.2 mm wide mounting points                        
(6) Notes are non-exhaustive. Always refer to the Öhlins Performance Suspension Guide to check compatibility with specific models.

Custom mounting hardware

Part Number Description Notes! Link
G5002-01 For Mondraker Summum 2x Bushing Aluminium, 10mm x 16 mm (outer diameter), 8 mm (inner diameter)  
G5003-01 For Canyon Strive top mount For 12.8mm bolt. Included: 2x Bushing Aluminum, 7mm (5+2mm) x 14,15 mm (outer diameter), 12,8 mm (inner diameter)  

Bushing reducers / Adapters for mounting hardware

ID = Internal Diameter, OD = Outer Diameter

Part Number Description Picture Notes! Link
16-2127 Reducer 16mm OD, 12.7mm ID 16-2-12.7

Require additional spacers: this type of assembly allow the use of 12.7mm mounting kits but will not allow the use of the IGUS bushing these are originally designed for, resulting in additional gap between the spacer and the shock cylinder head; closing the gap require custom spacers, additional spacers or O-rings

Buy
18486-01 Metal Reducer 16mm OD, 15x12.7mm ID 18486-01 Allows the use of standard bushing AND mounting hardware from TTX Air, Fox and Rockshox (no need for additional spacers) Buy
G5006-01 Metal Reducer 10x16mm OD, 12.8 ID G5006-01 For 12.8mm bolt. Included: 1x Bushing brass, 10 mm x 16 mm (OD), 12,8 mm (ID) Contact Us

General Modifications and Repairs for Öhlins TTX22M

Modifications Implications Feasibility Cost (parts + service)
Change travel / Replace stop cap

Change the stop cap. Require some disassembly and a re-bleed of the shock.

Travel can only be reduced or increased by 2.5, 5 or 7.5mm, within the limitations of each shock (metric specifications).

Legacy non-metric shocks can also use metric stop caps but the change of travel will not follow legacy specifications.

For travel reduction of just 2.5mm, it is possible to use user-installable external spacers

Feasible

If a service is needed: minimum 119 CHF

Change the length and travel of a shock / Replace Shaft Assembly and/or Twin Tube

Require in most case to replace the twin tube AND the shaft, which mean a full disassembly and re-assembly of the shock + a re-bleed.

Customers should be aware that this is not always enough to adapt a shock to another frame.

Others parts that can be needed: new spring, new cylinder head, new mounting hardware, new eyelet, new stop cap.

Feasible but the availability of parts is limited

Minimum 298 CHF

If more is needed to adapt the shock to another frame then the total cost can easily jump to ~500 CHF and more, up to the cost of a brand new unit

Change the cylinder head Replace the cylinder head. Require a near full disassembly, re-assembly and re-bleed of the shock, as well as a new protective plastic sleeve. Feasible but some TTX22 units were built with custom cylinder heads and replacements can be difficult to source. From 359 CHF (standard cylinder head) to 569 CHF (custom cylinder head)
Change the eyelet

Disassembly and re-assembly of the shaft assembly. New mounting hardware might be needed.

Customers should be aware that installing a metric eyelet on a non-metric shock will slightly reduce travel.

Feasible Minimum 139 CHF
Change the spring adjuster

Near-full disassembly and re-assembly of the shock + a re-bleed.

Feasible Minimum 184 CHF
Change the valve (gold to blue valve or blue to gold valve)

Replace the valve. Require a re-bleed of the shock.

A re-valving of the main piston might be also needed.

Feasible

Minimum 159 CHF

Re-valving of the main piston Modify the main piston shim stack. Require a disassembly and re-assembly of the shock + a re-bleed. Feasible Minimum 169 CHF

Prices mentioned here are strictly indicative and subject to change without warning.

Diagram with costs - repairs can be ordered online:

TTX22M Repairs

TTX22M Parts

Figure Description Price Variations
TTX22M-Spare-01 Rebound Knob 19-25 CHF
  • Standard length with screw
  • L10.5 without screw
  • L15 without screw
  • L20 without screw
  • L25 without screw
TTX22M-Spare-02 Compression Knob 25 CHF All the same
TTX22M-Spare-03 Nitrogen reservoir cap

39 CHF

Not available to the general public - only available with a service

All the same
TTX22M-Spare-04 End Eyes

49 CHF

Not available to the general public - only available with a service

  • 16mm
  • 15mm "press fit" - for metric shocks, will work on older shocks but will reduce travel by 2.5mm
  • Specialized
TTX22M-Spare-05 Spring Clips 29 CHF
  • Rugged clip for open-collar shocks
  • Standard clip for open-collar shocks
  • "+3.5mm" clip for open-collar shocks
  • Generation 2 clip for 15mm end eyes
TTX22M-Spare-06 Spring Collar

39 CHF

Not available to the general public - only available with a service

  • Generation 2 with side screws (compatible with all TTX22)
  • Generation 1
TTX22M-Spare-07 Stop Cap

25 CHF

Not available to the general public - available only with a service

  • 0mm
  • -2.5mm
  • -5mm
  • -7.5mm
TTX22M-Spare-08

Shaft Assembly

(shaft + eyelet)

129 CHF

Not available to the general public - only available with a service

Only for:

  • 14XX shocks
  • 16XX shocks
  • SBC 1510, 1810, 1770, 1880
TTX22M-Spare-09 Cylinder Head

219 CHF

Not available to the general public - only available with a service

  • Standard "side-by-side" with 16mm eyelet (can be reduced to 15mm using 18486-01)
  • Trunnion
  • Discontinued: cylinder head with "piggyback" reservoir
  • Special order only: special cylinder head for Scott Ransom (449 CHF)
TTX22M-Spare-10 Twin Tube

129 CHF

Not available to the general public - only available with a service

Only for:

  • 14XX shocks
  • 16XX shocks
  • SBC 1510, 1810, 1770, 1880
TTX22M-Spare-11

Shaft

(outter shaft + inner shaft + adjustment pin)

79 CHF

Not available to the general public - only available with a service

Only for:

  • 14XX shocks
  • 16XX shocks
  • SBC 1510, 1810, 1770, 1880
TTX22M-Spare-12 Protective Plastic Sleeve

19 CHF

Not available to the general public - only available with a service

All the same
TTX22M-Spare-13 Valve Assembly

129 CHF

Not available to the general public - only available with a service

  • Gold (DH)
  • Blue (Enduro / Trail)
TTX22M-Spare-14

Full Valve Assembly

(Valve + compression lever + low speed compression knob)

169 CHF

Not available to the general public - only available with a service

  • Gold (DH)
  • Blue (Enduro / Trail)