Öhlins TTX22m.2R Racing Tuned
Öhlins TTX22m.2R Racing Tuned
- Ready-to-mount custom tuned TTX22m.2R
- Race-proven settings developed by Öhlins
- Each order is for shock + spring: for spring rate you will be contacted and we will sort it out for you
- Each unit is build to order and tuned specifically for the customer
INCLUDED
- Rear Shock, value 820 CHF (standard head) or 880 (piggyback head)
- Spring, value 120 CHF - after ordering we will contact you to calculate the right spring based on your bike, weight and practice
- Custom Tune for your bike, weight and practice, value 220 CHF
- 10% off the total
picture for illustration purposes only and non-contractual - details will vary based on type of build and the availability of parts
TTX22m.2 / TTX22m.2R Custom Unit Features
Customs Öhlins rear shocks are built by PMB in Switzerland following a thorough checklist to optimize its fit, performance and durability
Compression Tuning | Adjusted based on the ride + practice + bike geometry |
Rebound Tuning | Adjusted based on the ride + practice + bike geometry |
Base Valve Type | DH or All Mountain / Enduro depending on rider's practice |
Settings | Settings are chosen from a fully up to date setting bank provided by Öhlins Racing AB |
Eyelet | TTX22m.2, m.1, original or proprietary depending on the fit with the bike; m.1 and original eyelets are used when they are the only ones compatible with the bike |
Cylinder Head | Side by side or piggyback depending on the fit with the bike |
Piston size | Each piston is sized to perfection to lower friction and increase durability |
Assembly in | Assembly in Switzerland by PMB for all custom units |
TTX22m / TTX22m.2 / TTX22m.2R Tuning Information
TTX22m.2 and TTX22m hydraulic tuning focus on compression and rebound
The standard setting bank give a wide range of settings for most riders
New: The all new Racing setting bank give access to fully updated race-proven settings for the most demanding racers
All tuning follow a race-proven setting bank:
- Compression: C5, C10, C20, C40, C50
- DH Compression: DHC40, DHC70
- DH Racing Compression: DHCR20, DHCR25, DHCR30, DHCR40, DHCR45, DHCR50
- Rebound: R20, R22.5, R25, R30, R35, R40, R50, R60
All changes are based on the rider's weight, practice and bike
Öhlins TTX22m.2 Features
Hydraulic System | Twin Tube (TTX) |
Spring Type | Coil |
Low Speed Compression (LSC) Adjustment | 16 clicks |
High Speed Compression (HSC) Adjustment | 3 clicks: open, medium, hard |
Rebound Adjustment | 7 clicks |
Remote Adjustement | No |
Stroke Adjustment | Can be done using 2.5mm spacers |
Coil spring preload | 1.5-2 turrns after the collar touch the spring |
Stroke for 185 and 210mm lengths | 55, 52,5, 50, 47.5mm |
Stroke for 205 and 230mm lengths | 65, 62.5, 60, 57.5mm |
Stroke for 225 and 250mm lengths | 75, 72.5, 70, 67.5mm |
Spring serie for 185 and 210mm lengths | 18075 |
Spring serie for 205 and 230mm lengths | 18077 |
Spring serie for 225 and 250mm lengths | 18073 |
Valve for 185, 205, 210 and 230mm lengths | Blue Trail compression valve (position 3 = pedal mode) |
Valve for 225 and 250mm lenghts | Golden DH compression valve |
Length x Travel available on demand | 190x45, 250/225mm with Blue Valve, 200x57 (8.75x2.25), 230mm Trek (with Trunnion head) |
Cylinder heads | Side-by-side or Piggyback (external reservoir) |
Eyelet size | 15mm inner diameter |
Service | Fully serviceable by qualified Öhlins Service Centers |
Durability | All parts are made available to qualified Öhlins Service Center |
Assembly in | Assembly in Switzerland by PMB for all custom units |